Product Lines
 
You are here :Products > Brazed plate heat exchanger > Brazed PHE air dryer
Refrigerated Air Dryer Excellent Thermal Performance for Air to Air Heat Exchang

 

Detailed Product Description

 

 

Refrigerated Air Dryer Excellent Thermal Performance for Air to Air Heat Exchanger

The heating surface consists of thin corrugated stainless steel plates that are compressed together to

form a plate pack. Channels are formed between the plates and the ports are arranged so the media

flows through alternate channels in full counter current flow. Media is directed by a brazed seal enhanced

with contact points to contain the media flow pressure. Convenient location of air in- and outlet on the same

side. Water is separated at the coldest point and then exits through a drain.

Features and advantages

Low energy consumption due to the very low pressure drop over the heat exchanger.

Excellent thermal performance.

Two combined heat exchangers, consisting of both the air to air heat recovery and air to refrigerant.

Integrated connection with heat recovery that requires no additional piping.

Convenient connection locations.

All refrigerant connections are on one side, air and water drain on the opposite side.

Stainless steel for reliability and long life.

Compact: The corrugated compressed plates significantly reduce the total air dryer size

 

Refrigerated air dryers separate humidity from compressed air by cooling the air in an evaporator. This cooling 

effect comes from the evaporation of the refrigerant. As the air cools,  it looses its ability to hold moisture. The 

condensate is then collected and removed in a separator.

A heat recovery air to air heat exchanger that reheats the air to ambient temperature is in the dryer for optimal 

efficiency.

The coldest temperature in the system determines the "dew point". "Dew point" is the temperature at which the 

water vapor in the air starts to condense in the water separator.

This is normally maintained slightly above the freezing point of water,  2-5 °C (35-40 °F).

The humid air enters into the heat exchangers and cools down in the air to refrigerant. This humid air then moves 

into a separator and then dry air is preheated in the heat recovery side. The total air side pressure drop is typically 

20-30 kPa (3-4 psi)

 

Refrigerated Air dryer

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support

Width

Height

Horizontal 

port 

distance

Vertical 

port 

distance

Thickness

Max Plates

Max flowrate 

(M3/h)

Weight  (kg)

Heat exchange

area (m2)

Volume L

111

310

50

250

10+2.36N

100

18

1.3+0.12N

0.026 (N-2)

0.025 (N-2)

 

Flow

Model

Freon connection

Air connection

Nm3/h

scfm

111

65

DBL26-26

1/2''   5/8''

1 1/8''

147

86

DBL26-34

1/2''   5/8''

1 1/8''

182

107

DBL26-42

1/2''   5/8''

1 1/8''

213

125

DBL26-50

1/2''   5/8''

1 1/8''

244

143

DBL26-58

1/2''   5/8''

1 1/8''

284

167

DBL26-70

1/2''   5/8''

1 3/8''

325

190

DBL26-81

1/2''   5/8''

1 3/8''

400

235

DBL26-113

1/2''   5/8''

1 3/8''

copyright © Baode Heat Exchanger Co.,Ltd. 2018

关闭